LED Description
The LEDs of the OSN4 module are shown in the following figure and described in the subsequent table.
OSN4 Module LEDs
OSN4 Module LED Description
|
Item |
Color |
State |
Description |
|---|---|---|---|
|
1 |
Green |
Flashing |
Firmware (BIOS) application active, payload (x86) in sleep. |
|
On |
Firmware (BIOS) application active, payload (x86) active. |
||
|
2 |
Red |
On |
Out-of-service indicator due to hardware failure. |
|
- |
Off |
Normal operation. |
|
|
3 |
Green |
Solid |
Valid Ethernet link (cable connection) established. |
|
Flashing |
Activity in the link. |
||
|
- |
Off |
The LED goes temporarily off if network packets are sent or received. When the LED remains off, a valid link has not been established due to a missing or a faulty cable connection. |
|
|
4 |
Orange |
On |
1000Base-TX connection. |
|
Green |
On |
100Base-T connection. |
|
|
- |
Off |
10Base-T connection if LED #3 is active. |
|
|
5 |
Blue
|
Flashing |
Module undergoing shutdown sequence when handle is pulled out to first extraction position, or module had been inserted and handle is still in first extraction position. |
|
On |
Module shutdown sequence complete and the module can be extracted from the chassis slot. |
||
|
Off |
Module correctly inserted in chassis slot. |